Oil and Gas Well Application

Description: RDX explosive core
Textile braid (white)
Nylon jacket (black)
Application: Primarily for use in wireline conveyed perforating systems to be employed at time and temperature (see graph). When this product is exposed to elevated temperature, (>190° F), some braid shrinkage can occur effecting explosive component interfaces. Therefore, this product is not recommended for use in tubing conveyed perforating systems (TCP). This product has also been successfully deployed in exposed "downhole" service applications within RDX operating ranges, however, the use of this product, exposed to well bore conditions, is not recommended. Users must satisfy themselves as to a product's suitability for an exposed application.
Explosive 80 gr/ft nominal (17.00 g/m)
Core Load:   75 gr/ft min. (15.96 g/m)
Detonation   7,000 m/s nominal (22,966 ft/s)
Velocity:   6,700 m/s min. (21,976 ft/s)
Diameter:   0.210 inches nominal (5.33 mm)
+/- 0.008 inches
___ 0.218" (5.54 mm)
___ 0.202" (5.13 mm)
Shrinkage:   6% Max. @ 325°F 24 Hrs
Jacket Thickness:   0.008" min.
Lap Joint Sensitive:   Yes
Temperature resistance is based upon the manufacturer's laboratory tests in air at ambient pressure only. No claim, representation, or warranty of any kind is made, expressed or implied, as to the temperature resistance of this product under actual conditions. Users must satisfy themselves as to a product's suitability for a specific application.
Shrinkage is defined as core "pull-back" inside the outer jacket.
Velocity was tested unconfined, at ambient pressure, and after "cool down".

Warning: Use of this product by persons who lack adequate training experience and supervision may kill or injure.

Application Recommendations

This product is not recommended for exposure to well bore fluids.
NEVER use PERFACORD® 80 RDX in exposed well bore conditions.
ALWAYS cut PERFACORD® 80 RDX detonating cord with a sharp knife.
NEVER attempt to cut PERFACORD® 80 RDX detonating cord with a blow from a sharp or blunt object, such as an axe, pipe wrench, or rock.
NEVER saw PERFACORD® 80 RDX detonating cord; it may explode and kill or injure.
NEVER cut detonating cord with devices that produce metal-to-metal contact, such as scissors, wire cutters, crimpers or similar instruments.



Detotec PERFACORD® must be shipped, stored, and handled in accordance with all federal, state,
provincial and local laws. Recommended shelf life under proper storage conditions is ten (10) years from date of manufacture. Use older inventory first.

Detotec PERFACORD® must be stored in a cool, dry, well-ventilated, licensed storage magazine for
maximum shelf life.

Shipping Information
Package Size: 10 9/16" x 10 9/16" x 5 5/16" 4G fiberboard box
Package wt:   10.5 lbs (4.8 Kg) gross
Contents:   1-500 ft. spool & "Warnings/Instructions/Disclaimer" insert. 500 ft. spools may contain as many as four (4) pieces, totaling 500 ft.(152.4m), with a minimum splice/piece length of 50 ft.
UN Name:   Cord, Detonating
UN Num.:   0065
UN Class:   1.1D
Ref. Num.:   EX-2005100219
Explosive wt:   5.7 lbs (2.6 Kg)
Alternate packaging:   PERFAPACK® 1.4S air cargo shipping containers
Product Code:   80R111A
Components, Explosive Train, N.O.S., 1.4S UN0384 II EX 2003080150
pvTT 0812
PvTT 17808
PvTT 174/08


Because these products are used under varying conditions over which Detotec has no control the products described herein are sold by Detotec without warranty, express or implied, including without limitation, any implied warranty of merchantability or fitness for a particular purpose and/or any other warranty. Under no circumstances shall seller be liable for damages for loss of anticipated profits, consequential damages, incidental damages or losses or damages to persons or property arising from the use of its products.

    Detotec North America Inc., PO Box 276, Sterling, CT 06377
860.564.1012 | fax 860.564.6895 | info@detotec.com